Medical Engineering & Physics
Volume 31, Issue 10 , Pages 1228-1234 , December 2009

A study on the mechanical properties of beagle femoral head using the digital speckle correlation method

  • Qinghua Wang

      Affiliations

    • AML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
    • ,
  • Huimin Xie

      Affiliations

    • AML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China
    • Corresponding Author InformationCorresponding author. Tel.: +86 10 62792286; fax: +86 10 62781824.
    • ,
  • Peifu Tang

      Affiliations

    • Orthopedic, 301 Chinese PLA General Hospital, Beijing 100853, China
    • ,
  • Qi Yao

      Affiliations

    • Orthopedic, Beijing Shijitan Hospital, Beijing 100038, China
    • ,
  • Peng Huang

      Affiliations

    • Orthopedic, 301 Chinese PLA General Hospital, Beijing 100853, China
    • ,
  • Pengwan Chen

      Affiliations

    • State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
    • ,
  • Fenglei Huang

      Affiliations

    • State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Received 4 January 2009 ,Revised 24 July 2009 ,Accepted 29 July 2009.

References 

  1. Ryan TM, van Rietbergen B, Krovitz G. Mechanical adaptation of trabecular bone in the growing human femur and humerus. American Journal of Physical Anthropology. 2007;44:205–1205
  2. Paul JP. Influence of head constraint and muscle forces on the strain distribution within the intact femur. Medical Engineering & Physics. 2002;24:243–1243
  3. Green DW. Tissue bionics: examples in biomimetic tissue engineering. Biomedical Materials. 2008;3:034010
  4. van Ruijven LJ, Giesen EBW, Farella M, van Eijden TMGJ. Prediction of mechanical properties of the cancellous bone of the mandibular condyle. Journal of Dental Research. 2003;82:819–823
  5. Shi XH, Jiang W, Chen HZ, Zou W, Wang WD, Guo Z, et al. The study of mechanical behavior on the interface between calcar-defect femur and restorations by means of finite element analysis. Applied Surface Science. 2008;255:290–292
  6. Andreaus U, Colloca M, Toscano A. Mechanical behaviour of physiological and prosthesized human femurs during stair climbing: a comparative analysis via 3D numerical simulation. Minerva Ortopedica E Traumatologica. 2008;59:213–220
  7. Shahar R, Zaslansky P, Barak M, Friesem AA, Currey JD, Weiner S. Anisotropic Poisson's ratio and compression modulus of cortical bone determined by speckle interferometry. Journal of Biomechanics. 2007;40:252–264
  8. Zaslansky P, Shahar R, Friesem AA, Weiner S. Relations between shape, materials properties, and function in biological materials using laser speckle interferometry: in situ tooth deformation. Advanced Functional Materials. 2006;16:1925–1936
  9. Zhang J, Niebur GL, Ovaert TC. Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation. Journal of Biomechanics. 2008;41:267–275
  10. Gordon KD, Duck TR, King GJW, Johnson JA. Mechanical properties of subchondral cancellous bone of the radial head. Journal of Orthopaedic Trauma. 2003;17:285–289
  11. Lee MK, Choi K, Lee TS, Lim HN. Evaluation of indentation test for measuring Young's modulus of cancellous bone. Eco-Materials Processing and Design VIII. 2007;544–545:307–310
  12. Hengsberger S, Enstroem J, Peyrin F, Zysset P. How is the indentation modulus of bone tissue related to its macroscopic elastic response? A validation study. Journal of Biomechanics. 2003;36:1503–1509
  13. Peters WH, Ranson WF. Digital imaging techniques in experimental stress analysis. Optical Engineering. 1982;1:427–431
  14. Pan B, Xie HM, Xu BQ, Dai FL. Performance of sub-pixel registration algorithms in digital image correlation. Measurement Science & Technology. 2006;17:1615–1621
  15. Pan B, Xie HM, Wang ZY, Qian KM. Study of subset size selection in digital image correlation for speckle patterns. Optics Express. 2008;16:7037–7048
  16. Zhou P, Goodson KE. Subpixel displacement and deformation gradient measurement using digital image/speckle correlation. Optical Engineering. 2001;40:1613–1620
  17. Thompson MS, Schell H, Lienau J, Duda GN. Digital image correlation: a technique for determining local mechanical conditions within early bone callus. Medical Engineering & Physics. 2007;29:820–823
  18. Jiang C, Pitt RE, Bertram JE, Aneshansley DJ. Fractal-based image texture analysis of trabecular bone architecture. Medical and Biological Engineering and Computing. 1999;37:413–418
  19. Bi P, Li G, Hou ZD. Measurement method & principal analysis of the bending deformation capacity of cortical & cancellous bone at femoral neck. Chinese Journal of Scientific Instrument. 2008;29:109–114
  20. Yao XF, Wang P, Dai RC. Experimental study of damage and fracture of cancellous bone using a digital speckle correlation method. Journal of Biomedical Optics. 2008;13:034026
  21. Poumarat G, Thiery C, Toumi H, Abdi M, Garder JM, Vanneuville G. Mechanical properties of human femoral head allografts after physico-chemical treatment (Osteopure(TM)). Revue de Chirurgie Orthopédique et Réparatrice de l’Appareil Moteur. 2004;90:442–448
  22. Pan B, Xie HM, Guo ZQ, Hua T. Full-field strain measurement using a two-dimensional Savitzky–Golay digital differentiator in digital image correlation. Optical Engineering. 2007;46:033601-2
  23. Tong W. An evaluation of digital image correlation criteria for strain mapping applications. Strain. 2005;41:167–175
  24. Schoenfeld CM, Lautenschlager EP, Meyer PR. Mechanical properties of human cancellous bone in the femoral head. Medical & Biological Engineering. 1974;12:313–317
  25. Brown SJ, Pollintine P, Powell DE, Davie MWJ, Sharp CA. Regional differences in mechanical and material properties of femoral head cancellous bone in health and osteoarthritis. Calcified Tissue International. 2002;71:227–234
  26. Krischak GD, Augat P, Wachter NJ, Kinzl L, Claes LE. Predictive value of bone mineral density and Singh Index for the in vitro mechanical properties of cancellous bone in the femoral head. Clinical Biomechanics. 1999;14:346–351
  27. Puttlitz CM, Goel VK, Clark CR, Traynelis VC, Jeffrey L, Grosland NM. Biomechanical rationale for the pathology of rheumatoid arthritis in the craniovertebral junction. Spine. 2000;25:1607–1616
  28. Voor MJ, Nawab A, Malkani AL, Ullrich CR. Mechanical properties of compacted morselized cancellous bone graft using one-dimensional consolidation testing. Journal of Biomechanics. 2000;33:1683–1688
  29. Cowin SC. Fabric dependence of an anisotropic strength criterion. Mechanics of Materials. 1986;5:251–260
  30. Cowin SC, Van Buskirk WC, Ashman RB. The properties of bone. In:  Skalak R,  Chien S editor. Handbook of bioengineering. McGraw Hill; 1987;p. 2.1–2.27

PII: S1350-4533(09)00165-9

doi: 10.1016/j.medengphy.2009.07.021

Medical Engineering & Physics
Volume 31, Issue 10 , Pages 1228-1234 , December 2009

Article Tools

* Image Usage & Resolution