Medical Engineering & Physics
Volume 30, Issue 6 , Pages 717-724 , July 2008

Orthogonal cutting of cancellous bone with application to the harvesting of bone autograft

Received 28 April 2006 ,Revised 22 February 2007 ,Accepted 28 February 2007.

References 

  1. Arrington ED, Smith WJ, Chambers HG, Bucknell AL, Nelson A, Davino . Complications of iliac crest bone graft harvesting. Clin Orthop Relat Res. 1996;329:300–309
  2. Lewandrowski K-U, Gresser JD, Wise DL, Trantolo DJ. Bioresorbable bone graft substitutes of different osteoconductivities: a histologic evaluation of osteointegration of poly(propylene glycol-co-fumaric acid)-based cement implants in rats. Biomaterials. 2000;21:757–764
  3. Russel JL, Block JE. Surgical harvesting of bone graft from the ilium: point of view. Med Hypotheses. 2000;55(6):474–479
  4. Betz RR. Limitations of autograft and allograft: new synthetic solutions. Orthopedics. 2002;25(5):561–570
  5. Ross N, Tacconi L, Miles JB. Heterotopic bone formation causing recurrent donor site pain following iliac crest bone harvest. Br J Neurosurg. 2000;14(5):476–479
  6. Summers BN, Eisenstein SM. Donor site pain from the ilium. J Bone Joint Surg. 1989;71-B(4):677–680
  7. Kessler P, Thorwarth M, Bloch-Birkholz A, Nkenke E, Neukam FW. Harvesting of bone from the iliac crest—comparison of the anterior and posterior sites. Br J Oral Maxillofacial Surg. 2005;43:51–56
  8. Robertson PA, Wray AC. Natural history of posterior iliac crest bone graft donation for spinal surgery—a prospective analysis of morbidity. Spine. 2001;26(13):1473–1476
  9. Silber JS, Anderson DG, Daffner SD, Brislin BT, Leland JM, Hilibrand AS, et al. Donor site morbidity after anterior iliac crest bone harvest for single-level anterior cervical discectomy and fusion. Spine. 2003;28(2):134–139
  10. Goulet JA, Senunas LE, DeSilva GL, Greenfield MVH. Autogenous iliac crest bone graft. Clin Orthop Relat Res. June 1997;339:76–81
  11. Kurz LT, Garfin SR, Booth RE. Harvesting autogenous iliac bone grafts: a review of complications and techniques. Spine. 1989;14(12):1324–1331
  12. Tanishima T, Yoshimasu N, Ogai M. A technique for prevention of donor site pain associated with harvesting iliac bone grafts. Surg Neurol. 1995;44(2):131–132
  13. Steffen T, Downer P, Steiner B, Hehli M, Aebi M. Minimally invasive bone harvesting tools. Eur Spine J. 2000;9(Supplement 1):S114–S118
  14. Symons MCR. Radicals generated by bone cutting and fracture. Free Radic Biol Med. 1996;20(6):831–835
  15. Matthews LS, Hirsch C. Temperatures measured in human cortical bone when drilling. J Bone Joint Surg. 1972;54-A(2):297–308
  16. Burstein FD, Simms C, Cohen SR, Work F, Paschal M. Iliac crest bone graft harvesting techniques: a comparison. Plastic Reconstruct Surg. 2000;105(1):34–39
  17. Jacobs CH, Pope MH, Berry JT, Hoaglund F. A study of the bone machining process—orthogonal cutting. J Biomech. 1974;7(2):131–136
  18. Krause WR. Orthogonal bone cutting: saw design and operating characteristics. J Biomech Eng. 1987;109:263–271
  19. Saha S, Pal S, Albright JA. Surgical drilling: design and performance of an improved drill. J Biomech Eng. 1982;104:245–252
  20. Natali C, Ingle P, Dowell J. Orthopaedic bone drills—can they be improved?. J Bone Joint Surg. 1996;78-B(3):357–362
  21. Hillery MT, Shuaib I. Temperature effects in the drilling of human and bovine bone. J Mater Process Technol. 1999;92/93:302–308
  22. Sharawy M, Misch CE, Weller N, Tehemar S. Heat generation during implant drilling: the significance of motor speed. J Oral Maxillofacial Surg. 2002;60(10):1160–1169
  23. Davidson SRH, James DF. Drilling in bone: modeling heat generation and temperature distribution. J Biomech Eng. 2003;125:305–314
  24. Jacobs CH, Berry JT, Pope MH, Hoaglund F. A study of the bone machining process—drilling. J Biomech. 1976;9(5):343–349
  25. Wiggins KL, Malkin S. Drilling of bone. J Biomech. 1976;9:553–559
  26. Krause WR, Bradbury DW, Kelly JE, Lunceford EM. Temperature elevations in orthopaedic cutting operations. J Biomech. 1982;15(4):267–275
  27. Shin HC, Yoon YS. Bone temperature estimation during orthopaedic round bur milling operations. J Biomech. 2006;39:33–39
  28. Mitsuishi M, Warisawa S, Sugita N. Determination of the machining characteristics of a biomaterial using a machine tool designed for total knee arthroplasty. Ann CIRP. 2004;53(1):107–112
  29. Jackson MJ, Robinson GM, Sein H, Ahmed W, Woodwards R. Machining cancellous bone prior to prosthetic implantation. J Mater Eng Perform. 2005;14(3):293–300
  30. Shaw MC. Metal cutting principles. Oxford Science Publications; 1989;
  31. Boothroyd G. Fundamentals of metal machining and machine tools. Scripta Book Company; 1975;
  32. Malak SFF, Anderson IA. Orthogonal cutting of polyurethane foam. Int J Mech Sci. 2005;47(6):867–883
  33. Stephenson DA, Agapiou JS. Metal cutting theory and practice. Marcel Dekker; 1997;

PII: S1350-4533(07)00149-X

doi: 10.1016/j.medengphy.2007.02.010

Medical Engineering & Physics
Volume 30, Issue 6 , Pages 717-724 , July 2008

Article Tools

* Image Usage & Resolution