Medical Engineering & Physics
Volume 28, Issue 5 , Pages 468-474, June 2006

An in line non-invasive optical system to monitor pH in cell and tissue culture

  • Xia Xu

      Affiliations

    • Department of Engineering Science, University of Oxford, Parks Rd., Oxford OX1 3PJ, UK
  • ,
  • Stanton Smith

      Affiliations

    • University Laboratory of Physiology, University of Oxford, Parks Rd., Oxford OX1 3PT, UK
  • ,
  • Jill Urban

      Affiliations

    • University Laboratory of Physiology, University of Oxford, Parks Rd., Oxford OX1 3PT, UK
  • ,
  • Zhanfeng Cui

      Affiliations

    • Department of Engineering Science, University of Oxford, Parks Rd., Oxford OX1 3PJ, UK
    • Corresponding Author InformationCorresponding author. Tel.: +44 1865 273118; fax: +44 1865 283273.

Received 2 March 2005; received in revised form 1 July 2005; accepted 11 July 2005. published online 30 August 2005.

Abstract 

pH is an important control parameter for maintenance of cell viability and for improving tissue functions during cell and tissue culture. pH monitoring during cell/tissue culture also provides valuable information on cell metabolic processes and living environment. In this study, an on-line, non-invasive pH monitoring system was developed for use during tissue/cell culture in a perfusion system, using an optical method. This device included light sources, light detectors, light guides and a flow cell. Phenol red was used as a pH indicator dye, and the ratio of light intensities at two wavelengths was measured at the same pH value. Low solution volume as low as around 10μl could be used to detect pH. Compared to the conventional optical methods, this non-contact optical measurement can avoid the contamination of the tip of optical fibre during the long-term monitoring. It provides a possibility to do on-line monitoring and apply feed back control to maintain the culture environment at the desired conditions required for long-term cell/tissue culture.

Keywords: Cell/tissue culture, In line pH monitoring, Optical system

To access this article, please choose from the options below

Login to an existing account or Register a new account.

  • Purchase this article for 31.50 USD (You must login/register to purchase this article)

    Online access for 24 hours. The PDF version can be downloaded as your permanent record.

  • Subscribe to this title

    Get unlimited online access to this article and all other articles in this title 24/7 for one year.

  • Claim access now

    For current subscribers with Society Membership or Account Number.

  • Visit SciVerse ScienceDirect to see if you have access via your institution.
 

PII: S1350-4533(05)00155-4

doi:10.1016/j.medengphy.2005.07.016

Medical Engineering & Physics
Volume 28, Issue 5 , Pages 468-474, June 2006