Medical Engineering & Physics
Volume 28, Issue 4 , Pages 323-330 , May 2006

Adhesion performance of UHMWPE after different surface modification techniques

  • R. Oosterom

      Affiliations

    • Production Technology, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands
    • Corresponding Author InformationCorresponding author. Tel.: +31 152789489; fax: +31 152781151.
    • ,
  • T.J. Ahmed

      Affiliations

    • Production Technology, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands
    • ,
  • J.A. Poulis

      Affiliations

    • Adhesion Institute, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands
    • ,
  • H.E.N. Bersee

      Affiliations

    • Production Technology, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629 HS Delft, The Netherlands

Received 16 December 2004 ,Revised 18 April 2005 ,Accepted 7 July 2005.

References 

  1. NIH Consensus Statement Online. Total hip replacement 1994;12:1–31.
  2. Jonsson B, Larsson SE. Functional improvement and costs of hip and knee arthroplasty in destructive rheumatoid arthritis. Scand J Rheumatol. 1991;20:351
  3. Wirth M, Rockwood C. Complications of shoulder arthroplasty. J Bone Joint Surg Am. 1996;8:603–616
  4. Gill DR, Cofield RH, Morrey BF. Ipsilateral total shoulder and elbow arthroplasties in patients who have rheumatoid arthritis. J Bone Joint Surg Am. 1999;81:1128–1137
  5. Kitaoka HB, Patzer GL. Clinical results of the Mayo total ankle arthroplasty. J Bone Joint Surg Am. 1996;78:1658–1664
  6. Antuna S, Sperling JW, Cofield RH. Reimplantation of a glenoid component after component removal and allograft bone grafting: a report of 3 cases. J Shoulder Elbow Surg. 2002;11:637–641
  7. Que L, Topoleski LD. Third-body wear of cobalt-chromium-molybdenum implant alloys initiated by bone and poly(methyl methacrylate) particles. J Biomed Mater Res. 2000;50:322–330
  8. Chu PK, Chen JY, Wang LP, Huang N. Plasma-surface modification of biomaterials. Mater Sci Eng, R. 2002;36:143–206
  9. Green MD, Guild FJ, Adams RD. Characterisation and comparison of industrially pre-treated homopolymer polypropylene, HF 135M. J Adhes Adhes. 2002;22:81–90
  10. Ogawa T, Mukai H, Osawa S. Effects of functional groups and surface roughness on interfacial shear strength in ultrahigh molecular weight polyethylene fiber/polyethylene system. J Appl Polym Sci. 1999;71:243–249
  11. Strobel M, Walzak WJ, Hill JM, Lin A, Karbashewski E, Lyons CS. A comparison of gas-phase methods of modifying polymer surfaces. In:  Mittal KL,  Lyons CS,  Strobel M editor. Polymer surface modification: relevance to adhesion. Coronet Books; 1994;p. 233–251
  12. Kihlman Øiseth K, Krozer A, Kasemo BK, Lausmaa J. Surface modification of spin-coated high-density polyethylene films by argon and oxygen glow discharge plasma treatments. Appl Surf Sci. 2002;202:92–103
  13. MacManus LF, Walzar MJ, McIntyre NS. Study of ultraviolet light and ozone surface modification of polypropylene. J Polym Sci Pol Chem. 1999;37:2489–2501
  14. Romero-Sánchez MD, Pastor-Blas MM, Martín-Martínez JM. UV treatment of synthetic styrene-butadiene-styrene. In: Presented at the Third International Symposium on Polymer Surface Modification: Relevence to Adhesion. Newark, May 21–22. 2001;
  15. Park KD, Kim J, Yang SJ, Yao A, Park JB. Preliminary study of interfacial shear strength between PMMA precoated UHMWPE acetabular cup and PMMA bone cement. J Biomed Mater Res. 2003;65B:272–279
  16. Anglin C, Wyss UP, Nyffeler RW, Gerber C. Loosening performance of cemented glenoid prosthesis design pairs. Clin Biomech. 2001;16:144–150
  17. Wu S. Polymer interface and adhesion. New York: Marcel Dekker Inc.; 1982;
  18. Friedrich J, Wigant L, Unger W, Lippitz A, Wittrich H. Corona, spark and combined UV and ozone modification of polymer films. Surf Coat Technol. 1998;98:879–885
  19. Premnath V, Harris WH, Jasty M, Merrill EW. Gamma sterilization of UHMWPE articular implants: an analysis of the oxidation problem. Ultra high molecular weight polyethylene. Biomaterials. 1996;17:1741–1753
  20. Kinloch AJ. Adhesion and adhesives: science and technology. London: Chapman and Hall; 1987;
  21. Pijpers AP, Meier RJ. Adhesion behaviour of polypropylenes after flame treatment determined by XPS(ESCA) spectral analysis. J Electron Spectrosc. 2001;121:299–313
  22. Øiseth SK, Krozer A, Kaseno B, Lausmaa J. Surface modification of spin-coated high-density polyethylene films by argon and oxygen glow discharge plasma treatments. Appl Surf Sci. 2002;202:92–103
  23. Owens DK. Mechanism of corona-induced self-adhesion of polyethylene film. J Appl Polym Sci. 1975;19:3315
  24. Mittal KL, Pizzi A. Adhesion promotion techniques—technological applications. Marcel Dekker Inc.; 1999;

PII: S1350-4533(05)00144-X

doi: 10.1016/j.medengphy.2005.07.009

Medical Engineering & Physics
Volume 28, Issue 4 , Pages 323-330 , May 2006

Article Tools

* Image Usage & Resolution